The product shows here is available with several styles, colors and sizes.
Please leave us a message on the payment page if the option is not allow to choose.
We will ship the product as your request.
The Hospeco ProWorks GL-V103P vinyl, powdered, industrial disposable glove has a smooth surface on the palm and fingers for tactile sensitivity. It meets Food and Drug Administration (FDA) regulations for food contact (21CFR, 170–199). The glove has a palm thickness of 3 mils and a finger thickness of 3 mils and is 9" long from the tip of the middle finger to the edge of the beaded wrist cuff. Vinyl is suitable for applications requiring frequent changing and reduces the likelihood of allergic reaction, but is not suitable for use in wet environments or when exposed to abrasion, chemicals, and high temperatures. Cornstarch on the inside of this powdered glove makes it easier to put on and take off than a powder-free glove. This ambidextrous clear glove is suitable for aviation, janitorial, and education applications.
|Palm thickness||3 mils|
|Finger thickness||3 mils|
|Minimum tensile strength||11 megapascals (MPa) before and after aging|
|Elongation before aging||300%|
|Elongation after aging||300%|
|Acceptable Quality Level (AQL)||4.0|
Tensile strength, measured in MPa, is the amount of force required to rip a glove; the higher the number, the stronger the glove material. Elongation measures how much a glove can be stretched before it breaks. It is expressed as a percent of the original length of the glove at the moment of breakage; the higher the percent, the more the glove can stretch. AQL is an FDA quality specification for the defect rate in surgical and exam gloves. The FDA requires an AQL of 1.5 for surgical gloves and 2.5 for exam gloves.
Disposable and limited-use gloves are used in medical, forensic, scientific, food service, and industrial applications. Disposable gloves are commonly made from flexible materials such as latex, nitrile, chloroprene, and vinyl. While most disposable gloves are designed for use on either hand, some can be purchased in hand-specific models. They are offered powdered or powder-free; silicone or silicone-free; chlorinated or non-chlorinated; coated or uncoated; with a standard- or extended-length cuff; sterile or non-sterile; and with textured or smooth fingers, fingertips, and palms. A glove's abrasion, cut, and puncture resistance are defined by glove material and thickness, and may be improved with the use of exterior coatings. Abrasion resistance means the glove helps protect the hand from contact with rough surfaces. Cut resistance means the glove helps protect the hand from blades and sharp instruments. Puncture resistance means the glove helps protect the hand from objects such as needles. Chemical resistance means the glove helps protect the hand from certain chemicals, and varies by glove material.
Hospeco manufactures gloves and personal protective supplies. The company, founded in 1919, is headquartered in Richmond Heights, OH.
Hospeco ProWorks GL-V103P Industrial Grade Vinyl Glove Powdered Disposable 9 Length 3 mils Thick Small (Pack of 100) B004PVSQ6A